At Expo 2025 in Osaka, Aki Hamada Architects (AHA) developed a one-of-a-kind 3D printed earthen rest facility employing a stand-alone crane by WASP. The AHA suggested a vision for future architecture in which people construct their nests from locally sourced materials. Soil was chosen as the material because it is a primitive and locally available resource that may be returned to the ground. This project demonstrates a future in which humans, nature, and robots cohabit, as achieved through natural-material architecture and advanced robotic 3D printing.
©WASP
The structure was erected utilizing a Stand-Alone Crane WASP from WASP capable of extruding earth to create a canyon-like architectural and landscape installation, as well as materials supplied entirely within Japan. The printed mixture, which was modeled after the traditional earthen walls of Japan, contained earth, clay, straw, pigments, hardening agents, and seaweed glue. The structure’s shapes are derived from organic curves that were gathered using 3D scanning from different parts of Japan. The building’s earthen components include a number of benches, planters, and basins for hand washing.
©WASP
Bench Planters
The crane 3D printer worked on-site, fabricating planters that serve as benches and tables. Four sets of these installations were created using the 3D printer’s full build capacity (6.2 meters in diameter and 1.7 meters in height) and placed throughout the site. The planters took various forms, such as C-shapes that surround visitors or many clustered “islands”. This made to create rest areas that encourage various ways of utilization for visitors.
©WASP
Wall Blocks
Wall blocks were printed by using natural earth as main component. The outer panels of the structure were prefabricated in a Toyama facility using the Crane WASP. Total 56 modules were printed, measuring 0.93 meters wide, 0.3/0.4 meters deep, and 1.2 meters high. Once printed wall blocks cured, they were transported and placed on-site, covering the distance of approximately 112-124 miles.
©WASP
Each block had a unique surface, and together they created a texture like actual rock. Given the scale of panel printing and transport was unparalleled, the entire process, from fabrication to installation, was planned from scratch.
©WASP
Hand Wash Basin
The wash basins for toilet users were also 3D-printed in the factory and brought to the site. These cylindrical pieces had a recessed front for knee room and a maintenance aperture at the back, allowing them to be slid beneath pre-installed sinks and countertops.
Learn with PAACADEMY: Check out the upcoming workshop on advanced clay 3D printing techniques using Rhino and Grasshopper for optimized material-aware toolpath.
©WASP
Project Details
Exhibition: Expo 2025
Location: Osaka, Japan
Architect: Aki Hamada Architects (AHA)
Purpose: Resting facility at the exhibition
Technology Used: Stand Alone Crane WASP
